Repair-Screen Screen Replacement For iPhone 7 Plus Black Touch Screen Display LCD Digitizer Assembly With Front Facing Camera Proximity Sensor Full Repair Tools(iphone 7 plus screen,black)

❼ â"…â"›â"¤â"¢ High quality iphone 7 plus screen is the best replacement for broken, faulty, cracke display.

Product Name: iphone 7 plus screen replacement LCD Display
Installation Note:
1.Test the iphone 7 plus screen by inserting the flex to the main board before installation; be sure you feel a gentle snap. If not, try again.
2.Confirm your phone 7 plus is power off before installation.
3.Do not press the left and upper corners of the screen, otherwise may cause lines on the screen.
4.Each screw should be installed into original location, because they are not same length! Never tighten screw over limit!
5.Treat flex cables gently, use tools instead of your finger during installation , otherwise the screen will damage!
If you meet with these issues: Can not turn on, touch insensitive, flash, lines on screen, ghost click etc.
Please try this: Power off your phone, disconnect all the cables including the battery cable, clean the connector on the motherboard, rec onnect the cables, leave the phone alone for a while in a dry environment, a hard reset of your phone power on.
Package includes:
- 1 x New iPhone 7 plus screen and digitizer
- 1 x Spudger
- 1 x Pentalobe 5-point screwdriver
- 1 x Pentalobe + screwdriver - 1 x Phillips #000 screwdriver
- 1 x Plastic opening tool
- 1 x Small Suction Cup
- 1 x iphone 7 plus screen protector

Another product that competes with the previous one is this Oli & Ode Compatible with iPhone 7 Plus Screen Replacement (5.5 Inch White), LCD Digitizer Touch Screen Assembly Set with 3D Touch, Repair Tools and Replacement Manual Include

iphone 7 plus screen replacement Compatible with models: A1661/A1784/A1785

iPhone 7 plus replacement screen (5.5 Inch)

Installation: 
1. Please make sure you are a special repair technician, otherwise you will break the product. 
2. Please test it by inserting the flex to your motherboard before installation, be sure you feel a gentle snap. If not, then try again, or the cable will not be connected properly and will not work functionality.

If you meet some problems like can't turn on, touch insensitive, flash, lines on screen etc, please follow below steps: 
1. Please check the LCD to make sure the flex cables are in good condition and there are no debris on the connector. 
2. Disconnect and reconnect the flex cables from the motherboard side. 
3. Then Reboot: Hold buttons (Home, Up volume, and Power button) untill the phone switch down and then switch up again. 
4. Make sure IOS has been upgraded to the latest version. 
5. Please leave phone alone overnight and see if this problem persists in the morning. Sometimes there is static after installing that will go away after some time.

Package Include: 
1* iPhone 7 plus (5.5 Inch) LCD replacement assembly kit
1* Set Repair Tool Kits,

Warning: No protection & Inappropriate installation may cause injury. Please follow installation guide step by step.
1.Check the package before open it. If found break, Please contact Amazon or Seller for exchange.
2.Please switch off phone to avoid any electrical injury before installation.
3.Not charge phone to avoid any electrical injury during replacement...

JOYLAND Rubber Phone Case/Friends Design/Funny Sitcom TV Parody Collection Protective Case Gel Cover for iPhone Xs Max

Pocket Hole Clamp for Woodworking, DIY-ers, Slant-hole Drilling and Power Tool Accessories 2019

The Girl on the Boat 2019

2019-2020 Academic Planner - Weekly & Monthly Planner, July 2019 - June 2020, Flexible Cover,12 Monthly Tabs, 21 Notes Pages, Twin-Wire Binding with Two-Sided Inner Pocket, 5" x 8" 2019